100% Verzweigungsbeschriftung YES verläuft

Flussdiagramm-Tool

Sie sehen ein Beispiel. Ändern Sie es zum Ausprobieren oder beginnen Sie über Datei → Neu von vorn. Ohne Anmeldung, und Ihre Diagramme werden an keinen Server gesendet.

Prüftext für KI
Aus einem Zeitdiagramm aufbauen
Gerätenamen (aus dem Zeitdiagramm übernommen; eine Änderung hier gilt nur für dieses Flussdiagramm)
Darstellung
Wie auf das Signal der Gegenseite gewartet wird, wenn nur eine Seite gezeichnet ist
Kurzreferenz

Placing symbols

Click a symbolAdd it below the selected symbol and connect it (everything below moves down)
Drag a symbolDrop it wherever you like; dropping it on a line inserts it between two steps
Move panelsDrag a panel by its header (⠿) to the top or bottom of the left or right column, into tabs with another panel, or into a new column beside it (up to two columns on each side). ⋯ offers the same choices, and “Reset to default layout” puts everything back

Connecting and branching

Drag the exit handleDrop it on a symbol to connect to it; drop it on empty space to create a new process already connected
The YES / NO handlesDrag them to set where a decision branches. The line is labelled automatically
Drag the arrowheadMove the destination to another symbol
Drag the middle of a lineMoves that part sideways so you can tidy the route by hand (it gains waypoints). The □ / ■ marks on a selected line are its waypoints and can be dragged too
Double-click a waypointPuts the line back on its automatic route — as does dragging the part you moved back onto the straight line
Branch labelsSwitch YES/NO, Yes/No, True/False and the like for the whole chart (each decision can override it)

Editing

Double-click / F2Edit the text (just typing starts an edit). Shift+Enter inserts a line break

Building from a timing chart

Device namesThe names set in the timing chart toolbar (Master / Slave) become the lane headings, such as “Master: PLC”
Side by sideMaster and slave are drawn in separate lanes. No wait symbols are placed; instead the step that sends a signal is joined to the step that reacts to it by a dotted arrow (a signal line), for example Req ← ON → Busy ← ON
One side onlySeen from the side you chose, a change of the other side's signal becomes a “wait” (decision or wait symbol) and a change of your own becomes a “process”
DirectionGive each signal M→S / S→M in the timing chart and master and slave can be separated
Cause-and-effect arrowsWhere the timing chart has arrows (cause → effect), the order of “wait → process” and the signal lines follow them exactly

Lanes and signal lines

Drag the □Select a symbol (or hover over it) and a □ appears beside it; drop it on another symbol to draw a signal line
Select a signal line and drag an endDrop the □ (sender) or ● (receiver) on another symbol to move it. The right-click menu does the same
Right-click → Draw a signal line…Draws the line to the symbol you click next (Esc cancels). Alt+drag works too
Insert → Add a laneThe first lane is the master, the second the slave. Drag a symbol into another lane to change its side; double-click a heading to change the device name
“Side exit on the left”Sends the NO branch out to the left. In the left-hand lane, sending it outwards keeps it clear of the signal lines
Benutzerhandbuch — Flowchart Editor

Flowchart Editor — User Guide

Draw control flow with the symbols of JIS X 0121 (ISO 5807) and export it as a drawing for your specification, as Markdown, or as a review text for an AI — and build it automatically from a timing chart.

1. Overview

The Flowchart Editor places terminators, processes, decisions, waits and the other symbols and joins them with arrows. A new symbol is placed under the selected one and everything below moves down automatically, so a flow can be assembled quickly from the keyboard alone. Lines route themselves around the symbols, and you can tidy the few that need it by hand.

It runs entirely in the browser, and your data is saved only inside the browser on this machine. Nothing is sent anywhere.

2. Tutorial (your first flow)

  1. Click the “Start” terminator to select it and press Enter; a “Process” is added below. Type the text and press Enter to confirm.
  2. Shift+Enter adds a “Decision”, where you write a condition such as “Start button ON ?”.
  3. Drag the “NO” handle of the decision back onto the decision itself and you have a “wait until the condition is true” loop.
  4. Drag the exit handle of the last process onto “End” to close the flow.
  5. Ctrl+L arranges the drawing: the YES flow in one column, the NO flow in the column to its right.
  6. In “Output → Export…” (Ctrl+E) pick Markdown and press “Copy to clipboard”, then paste it into Notion or GitHub.

“Tutorial” in the Help menu loads the sample and walks you through the same steps on screen.

3. Symbols and connections

Clicking a symbol in the palette on the left adds it below the selected symbol; dragging it drops it wherever you like, and dropping it onto a line inserts it between two steps. Selecting a symbol shows its exit handle (○): drag that onto another symbol to connect them, or onto empty space to create a new process already connected. The YES / NO wording is switched for the whole chart with “Branch labels”, and each decision can override it.

For steps that run at the same time (closing a clamp while stopping a conveyor, for example), use “Parallel start” and “Parallel end” (the JIS double line for parallel processing). Select a parallel start to set the number of branches and where they go in the panel on the right; connecting the end of every branch to a parallel end means “continue only after all branches have finished”. “Arrange” widens the double lines across the branch columns so the lines run straight up and down.

4. Tidying a line by hand

Symbols are joined bottom-to-top, following the top-to-bottom reading of a flowchart. Only when the other symbol sits directly beside it — overlapping in height and clear of it left or right — are the two side edges joined straight across; a hand-over between swimlanes takes this form. The left and right vertices of a decision are its branch outputs, so no line is ever brought in there (its entrance is the top vertex).

Lines normally route themselves around the symbols. When one does not go where you want, drag the middle of it and that part moves sideways. The drag records waypoints on the line, and from then on the line is drawn through them instead of along the automatic route. Selecting a line shows its waypoints as □ / ■, which you can drag.

Double-click a waypoint, or drag the part you moved back onto the straight line, and the waypoints disappear and the automatic route returns. Right-clicking a line and choosing “Back to the automatic route” does the same, and auto-arrange (Ctrl+L) puts every line back.

5. Lanes and signal lines

When the work is split between two sides — a master and a slave, say — “Insert → Add a lane” gives each of them a vertical band (a swimlane). Dragging a symbol into another lane changes which side it belongs to. A signal handed from one side to the other is drawn as a signal line (a dotted arrow): drag the □ beside a symbol onto the symbol on the other side. A signal line means “the receiving side takes this as the trigger for its next step”.

6. Building it from a timing chart

This is the last of the four design tools (System Diagram → Memory Map → Timing Chart → Flowchart). “← Timing Chart” at the right of the toolbar goes back one step. After changing the timing chart, “Rebuild” regenerates this drawing with the same settings as before (anything you edited here is replaced, so save it first if you want to keep it).

Use “To Flowchart →” in the Timing Chart Editor, or load the JSON with “Build from a timing chart…”, and the flow is generated from the signal changes. A change of your own signal becomes a “process”; a change of the other side's signal becomes a “wait” (a decision or a wait symbol). If you drew cause-and-effect arrows in the timing chart, the order is built so that the cause is awaited before the resulting output changes, and in the side-by-side style the signal lines follow those arrows exactly. Changes with no arrow are laid out in step order.

7. Keyboard shortcuts

8. Output and saving

Everything you can export lives in one place: “Output → Export…” (Ctrl+E). Each format says where it is meant to be pasted, so you pick one and press “Copy to clipboard” or “Save to a file”.

  • SVG: a white-background, black-line drawing for a specification. Save it to a file and bring it in with Insert → Picture in Word, Excel or PowerPoint, and the lines stay sharp however far you zoom.
  • Image (PNG): copy it and paste it straight into Word, Excel, PowerPoint, an e-mail or a chat.
  • Draw.io: symbols you can keep editing as shapes. Copy it and press Ctrl+V in the draw.io window. A drawing changed in draw.io cannot be loaded back into this editor, so change the symbols and arrows here and paste again.
  • Markdown: the flowchart in Mermaid form with the list of steps and the signal hand-overs. GitHub and Notion render it as a picture.
  • Mermaid: only the flowchart, as Mermaid code (.mmd) — the same diagram as in the Markdown.
  • JSON: the format shared by all four tools — for feeding an AI or handing the data to the next tool.

If draw.io pastes it as plain XML text, add a new page with the + at the bottom left and choose Extras → Edit Diagram… on the menu bar (without the menu bar: + → Advanced on the toolbar). The box holds the XML of the current page: select it with Ctrl+A, paste, and press Apply. Apply replaces everything on the page, which is why a new page is used.

Your work is saved automatically in the browser, but press Ctrl+S to keep it as a JSON file.

A machine usually has several flowcharts, one per process. Use the “Flowchart ▾” list at the top to add, switch, duplicate and remove them. Once there are two or more (or when made from a chart with partitions), the “This machine” tree appears on the left and takes over the list (click a flowchart to switch to it; use ⋯ in its header to add, duplicate or remove; click a partition to make this a diagram of that partition). It also lists the system diagram, memory maps and timing charts of the same machine, and items marked ↗ open in their own tool. The tree, the symbols and the properties can be dragged by their headers to the top or bottom of the left or right column, into tabs with another panel, or into a new column beside it (also from ⋯). Once you use the list, New, Open and Create from timing chart keep the current chart in the list and add another one. “Save the whole list to a machine file…” puts them all in one file, and “Put all into the list” brings them back when you open a machine file.

For the thinking behind this kind of drawing — what belongs on one sheet and the pitfalls seen on site — see the guide How to draw a PLC control flowchart (in Japanese). All four editors are listed on the FA Spec Tools home page.

9. Contact

Please send bug reports and feature requests to yk.builds.space@gmail.com. Steps to reproduce the problem — and, if you can, the saved JSON file — make it much quicker to look into.

Entwickler unterstützen

Die vier Editoren — Systemdiagramm, Adressplan, Zeitdiagramm und Flussdiagramm — werden von einer Einzelperson entwickelt und kostenlos veröffentlicht, damit das Schreiben von Steuerungsspezifikationen etwas leichter fällt.
Jeder Beitrag wird unmittelbar zu Zeit für die nächste Funktion.

Nichts ist hinter einer Zahlung eingeschlossen, und Sie werden nie zur Kasse gebeten.
Unterstützung ohne Geld hilft genauso — Fehler melden oder Funktion vorschlagen / Kolleginnen und Kollegen von den Werkzeugen erzählen.

Die Zahlung läuft vollständig über Stripe. Kartendaten erreichen dieses Werkzeug nie.
JSON einfügen

Fügen Sie das JSON ein, das Ihnen eine KI gegeben hat. Folgt es dem Datenformat, wird daraus direkt eine Zeichnung.

Exportieren

Wählen Sie ein Format; die Ausgabe passt zum jeweiligen Ziel.

Importieren

Wählen Sie, woher die Daten kommen.